Programme
Quantum Computing for laminates optimization – stacking sequence retrieval
Chaired by:
Prof. Clara Schuecker
(Montanuniversität Leoben, Austria)
Chaired by:
Prof. Pedro Camanho
(University of Porto, Portugal)
-
A localised continuum damage mechanics model for fibre failure in explicit integration
J. Selvaraj * , S. Hallett -
Assessment of the credibility of simulations for composite Bolted L Angle in a building block approach
F. Grotto * , S. Miot , L. Barrière -
Intralaminar Failure of Laminated Composites Modelled by Continuum Damage Mechanics Combined with Computationally Efficient Homogenisation
K. Hertelendy * , R. Larsson , R. Gutkin -
A Mori-Tanaka Homogenization-based Model for Mechanical and Oxidation-induced Damage in SiC/BN/SiC CMCs
V. Dubey * , B. El Said , L. Kawashita , G. Allegri , S. Hallett -
Development of a homogenization theory to model delamination damage in composite materials with large number of layers under static and cyclic loads
A. Taherzadeh Fard * , S. Jiménez , A. Cornejo , L. Barbu -
A Macroscale Viscoplastic Damage Model for 3D-Textile Reinforced Composites and its Application to Aeroengine Components
F. Panteri , S. Saseendran , C. Oddy *
Chaired by:
Prof. Chiara Bisagni
(Politecnico di Milano, Italy)
-
A Mold Compensation Method Using Spectral Shape Representation
S. Zein * , A. Parmentier , D. Dumas -
Quantum-assisted Stacking Sequence Retrieval and Laminated Composite Design
A. Wulff * , S. Madabhushi Venkata , B. Chen , Y. Tang , M. Möller , S. Feld -
Stiffness estimation of composite bone fracture plate using numerical simulations
K. Szymkiewicz * -
A framework for simultaneous topology and layup optimization of laminated composite structures
M. Andreasson , E. Holmberg , E. Marklund * , C. Thore -
Modal Analysis of a Laminate Panel with 10 mm Notch Focused on the Effect of a Functionally Oriented Fabric Layup with 30 mm Wide Carbon Strips
R. Zbončák * -
A Multi-Scale Visco-Elastic Modeling Approach Applied to DMA Tests of Multi-Layered Laminates with Thermoplastic Matrix
C. Moser , P. Koll * , M. Pletz , C. Schuecker
Chaired by:
Dr. Luiz Kawashita
(University of Bristol, United Kingdom)
-
Attraction of Crack Faces: In-situ Experimental Characterisation of the Cohesive Traction Field in Delaminations
N. Stagsted * , E. Lindgaard , S. Jensen , B. Bak -
Plate-theory-based Model for Delaminated Sandwich Panels with Guaranteed Interlaminar Stress Continuity
B. Hauck * -
Incremental Numerical Model to Explore Crack Propagation in Lithosphere-Inspired Multilayer Polymers
A. Mohammad Sharifi * , M. Pletz , C. Waly , F. Arbeiter , C. Schuecker -
Analytical models for the impact on composite plates
J. Wichmann , S. Dölling * , I. Vladimirov , J. von Lautz -
Prediction of impact damage and post-impact residual load-bearing capacity of NCF CFRP components
A. Cherniaev * , M. Kazemian -
A New Engineering and Lifing Approach for Predicting Impact Damage in Various Composite Structures
H. Alhashmy * , B. Blackman , K. Nikbin
Chaired by:
Dr. Badadjida Wintiba
(Université libre de Bruxelles, Belgium)
-
A Hybrid Virtual Element Method for laminated composite plates
F. Liguori * , A. Madeo , S. Marfia , G. Garcea , E. Sacco -
Towards Fully Discrete Modelling of Brittle Fracture Modes in Composite Materials
E. Iarve * , K. Hoos , E. Zhou , M. Ballard , D. Mollenhauer -
Virtual element method with adaptive mesh refinement for simulation of brittle fracture in composite materials
M. Lo Cascio * , A. Milazzo -
On probabilistic entropy applications in uncertainty quantification of composite materials
M. Kamiński * -
Uncertainty Quantification of Open-Hole Coupons Through a Global-Local Approach with PC-Kriging Surrogate Modelling
J. Moreira Lima de Sousa * , F. Danzi , C. Furtado , A. Kumar , G. Catalanotti
Chaired by:
Prof. Stephen Hallett
(University of Bristol, United Kingdom)
-
Separation of Resistance-Welded Thermoplastic Composite Joints Produced with CF/LM-PAEK
H. Schaefer * -
Interaction of matrix cracking and diffuse delamination in cross-ply composites
V. Pires * , M. Gfrerrer , C. Schuecker -
Unveiling Interrelations among Mechanical Properties of Polymer Composites
E. Dinler * , I. Rodrigues Lopes , C. Furtado , P. Camanho -
Multi-phase field model for fiber-reinforced composites using Puck failure theory
P. Asur Vijaya Kumar * , H. E. Pettermann -
Computational Modeling of Rate-Dependent Plasticity, Fracture and Fatigue in Bonded Thermoplastic Composite Parts
P. Hofman * , F. van der Meer , B. Sluys -
Molecular Simulation-informed Phase-field modeling of fracture in Polymer Nanocomposites
S. Zakavati , B. Arash *
Chaired by:
Prof. Aleksandr Cherniaev
(University of Windsor, Canada)
-
Review on ThinPly fibre reinforced composites
B. Fiedler * , F. Touni , M. Neunacher , K. Yamada , M. Nishikawa -
Mechanical properties of the hybrid Bouligand laminates and thin ply angle ply laminates with small angles
K. Yamada * , H. Matsumoto , R. Yoshikawa , M. Nishikawa -
Investigation of the optimal stacking sequence of Thin-Ply FML to suppress delamination in Transition Zone
T. Nishiyama * , M. Nishikawa , K. Yamada -
Damage Characterization and Modelling for Thin-Ply CFRP Laminates under Impact Loading
M. Nishikawa * , N. Takatsuka , K. Yamada -
Microscale Analysis of Fatigue Propagation Properties of Delamination in Thin-Ply CFRP Laminates
R. Yamashita * , K. Yamada , Y. Sugimoto , E. Terasawa , T. Shibuya , H. Ogawa , R. Kuroda , M. Nishikawa -
Numerical and Experimental Investigation of Bio-Inspired Composite Structures based on the Microstructure of Sponge Spicules
M. Neubacher * , F. Touni , B. Fiedler -
Exploring Stacking Sequences for Enhanced Damage Tolerance in Thin-Ply CFRP Bouligand Laminates: A Numerical and Experimental Approach
F. Touni * , M. Neubacher , B. Fiedler
Composites at the Limit: Embracing Buckling for Innovation in Aerospace Structures
Chaired by:
Prof. Carolina Furtado
(University of Porto, Portugal)
Chaired by:
Prof. Antonio Madeo
(University of Calabria, Italy)
-
Delamination Growth Characteristics in Postbuckled Composite Laminates under Fatigue Loading
S. Subramaniyan Venkat * , P. Anilkumar , S. Scheffler , E. Baranger , R. Rolfes -
A Preliminary Study of an Aeronautical Multi-Stable Composite Stiffened Panel
X. Li * , C. Bisagni -
Solving post-buckling Ritz equations involving mode changes
S. Dillen * , C. Mittelstedt -
Approximate Computational Model for the Local Buckling and Postbuckling of Thin-Walled Stiffened Composite Panels
C. El Yaakoubi-Mesbah * , C. Mittelstedt -
A Single-Domain Ritz Approach for Buckling Analysis of Curvilinearly Grid-Stiffened Composite Panels
A. Alhaj Ahmad * , C. Mittelstedt -
Modelling of Thermomechanical Warping in Carbon Fibre/Peek Laminates manufactured using Laser Assisted Tape Placement
G. Zucco * , E. Tobin , R. O'Higgins , P. Weaver
Chaired by:
Prof. Endel Iarve
(University of Texas at Arlington, United States)
-
Advanced Analytical Model for the Design and Mechanical Analysis of Thick-walled Composite Pressure Vessels for Hydrogen Storage
M. Hondekyn * , M. Pastrello , N. Ali , W. Van Paepegem -
Finite Element Modelling of Alternative Repair Methods for Damaged Honeycomb Sandwich Beams
A. Wiegmink * , J. Vroon , M. Post -
Nonlinear response of a laminated composite structure including ply and interface damage
A. Jahn * , H. Pettermann -
Finite element analysis (FEA) of bio-inspired helicoid carbon fibre-reinforced polymers (CFRPs) under open-hole tension and compression
H. Wang * , E. Kazemi , L. Mencattelli , O. Walsh , S. Pinho -
Integrating Laminate-Level Bolted Joint Failure Envelope Data into Low-Fidelity Finite Element Models for Composite Joint Stiffness and Failure Prediction
A. Volpi * , F. Danzi , G. Catalanotti , C. Furtado -
Rapid digital manufacturing and structural analysis of 3D textiles
P. Foster * , M. Pei * , S. Hallett *
Chaired by:
Dr. Boyang Chen
(TU Delft, Netherlands)
-
The Application of Potential Energy Landscape based Method in Material Properties Analysis of Nanoparticle Reinforced Epoxy Resin
T. Wang * , B. Bahtiri , A. Dean , S. Scheffler , R. Rolfes -
The Cylindrical Microplane Model for FRPC Laminates
F. Caner * , R. Miquel -
Higher-Order Homogenisation of Large-Scale RVEs: Challenges and Implementation Strategies
A. Kumar * , A. K.W. Hii , S. R. Hallett , B. El Said -
Bridging Manufacturing Processes and Structural Analysis: A Robust Workflow for High-Fidelity Mechanical Simulations
S. Abdel-Monsef * , G. Guillamet , A. Sasikumar , D. Kandil , A. Turon -
Stiffness of Plant Fiber-reinforced Biocomposites: Mean-field Homogenization and Partially-Bayesian Kolmogorov-Arnold Network Surrogate Modeling
M. Königsberger * , T. Härkönen , M. Mińkowski , S. Särkkä , J. Füssl -
Numerical Modelling of Tow-Based Discontinuous Composites for Stiffness and Strength predictions with a Parametric Study
L. Gulfo Hernandez * , I. Katsivalis , L. Asp , M. Fagerström
AI and data-driven methods for composite multi-scale analyses
Chaired by:
Prof. Martin Fagerström
(Chalmers University of Technology, Sweden)
-
AI and data-driven methods for composite multi-scale analyses
L. Noels * , C. Anglade , L. Wu
Chaired by:
Prof. Bodo Fiedler
(Hamburg University of Technology, Germany)
-
Analysis of the damage resistance and damage tolerance of novel unconventional laminates (Double-Double)
G. Aquotti * , N. da Silva , A. Arteiro -
Recycling of Carbon Fibre and Amine-Epoxy Composites Through Sustainable and Low-Cost Chemical Treatment Using Hydrogen Peroxide
G. Petropoulos , P. Tsokanas * , V. Kostopoulos -
A Resin Infiltration Model to Optimize Transparent Wood Production
T. Verho * , R. Dsouza , J. Vaari , A. Puisto , S. Fortino , D. Nuvoli , A. Mariani -
The influence of the density on the mechanical behaviour of geopolymers
A. Valenza * -
Experimental and Numerical Characterization of Fracture Mechanics of Glass-Carbon Hybrid Composites
J. Mahishi * , V. Aitharaju -
Micromechanical Modelling of Transverse Cracking in Unidirectional Composites Using Periodic 3D RVEs with Realistic Fiber Packing
R. Guo , M. Mehdikhani , C. Breite * , Y. Swolfs
-
Interaction-Based Stochastic Deep Material Networks for stochastic and damaging composite materials
L. Wu * , L. Noels -
Simulation of Fiber Bridging via Physics-based and Data-driven Models.
R. Grosselle * , E. Lindgaard , A. Larsen , A. Olesen , S. Mosbjerg Jensen , S. Escalera , B. Lau Verndal Bak -
Real-time Prognosis of AFP Manufacturing Defects using Artificial Intelligence
A. Koptelov * , B. El Said , I. Tretiak -
A Data-driven Approach to predict Strain Rate Effect of Carbon/epoxy Composites incorporating Constitutive Artificial Neural Networks (CANNs)
S. Yoo * , I. Aslamsha , D. Bhattacharya , J. Kowalski , N. Toso , H. Voggenreiter -
Graph Neural Networks for Efficient Prediction of Mechanical Response in Composite Structures with Unstructured Meshes
L. Patrignani * , S. Pinho -
Deep Eshelby Network: An AI Framework for Multiscale Mean-Field Homogenization with Arbitrary Inclusion Shapes
M. Schwaighofer * , M. Königsberger , S. Pech , M. Lukacevic , J. Füssl
Chaired by:
Dr. Ling Wu
(University of Liege, Belgium)
-
Determining Feasibility Bounds of Lamination Parameters using Neural Networks
S. Madabhushi Venkata * -
Machine Learning-Accelerated Predictions of Design Allowable of Composite Laminates
C. Furtado * , L. Rodrigues , J. Ferreira , I. Lopes , J. Esteves , F. Danzi , G. Guillamet -
A Data Driven Constitutive Model for the Elasto-Damage Response of Transversely Isotropic Materials
M. Kofler * , L. Peyker , K. Key , C. Fricke , M. Luxner , H. Pettermann -
Prediction of shear angles in molten state thermo-stamped thermoplastic composites using a graph neural network
B. Wintiba * , C. Viviers , F. Caetano , J. Chevalier , F. Van Der Sommen , T. Massart , P. Berke -
From Material Sample to Statistically Representative Elastic Properties: an X-Ray CT-Based End-to-End Pipeline to Predict as-Manufactured Properties of 3D-Textile Reinforced Composites
J. Friemann * , L. Pilgaard Mikkelsen , C. Oddy , M. Fagerström
SPONSORS
Copyright © 2025 CIMNE, All Rights Reserved.
Terms of service
Terms of service